Installing Or Replacing A Memory Module - Lenovo ThinkStation E31 Hardware Maintenance Manual

Hardware maintenance manual (hmm) (june 2012) - thinkstation e31 (type 2551, 2552, 2553, 2554, 2555)
Hide thumbs Also See for ThinkStation E31:
Table of Contents

Advertisement

7. Pivot the card latch to the closed position to secure the PCI card.
Figure 16. Installing a PCI card
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 118.

Installing or replacing a memory module

Attention:
Do not open your computer or attempt any repair before reading and understanding "Important Safety Information"
on page 1.
This section provides instructions on how to install or replace a memory module.
Your computer has four slots for installing or replacing DDR3 UDIMMs that provide up to a maximum of
32 GB system memory. When installing or replacing a memory module, use 2 GB, 4 GB, or 8 GB DDR3
UDIMMs in any combination up to a maximum of 32 GB.
The following table provides information about the memory module installation rules that you should
consider when installing or removing a memory module. The "X" mark indicates the memory slot(s) into
which the memory module(s) should be installed in different situations. The numbers 1, 2, 3, and 4 indicate
the installation sequence. To locate the memory module slots, see "Locating parts on the system board"
on page 74.
5
6
7
8
3
4
.
Chapter 10
Replacing FRUs (for machine types: 2551, 2552, 2553, 2554, and 2555)
91

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents