Replacing The Power Supply Assembly - Lenovo ThinkStation E31 Hardware Maintenance Manual

10. Lower and position the heat sink fan duct on the top of the heat sink and fan assembly until it snaps
into position.
Figure 81. Installing the heat sink fan duct
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 165.

Replacing the power supply assembly

Attention:
Do not open your computer or attempt any repair before reading and understanding "Important Safety Information"
on page 1.
This section provides instructions on how to replace the power supply assembly.
Although there are no moving parts in your computer after the power cord has been disconnected, the
following warnings are required for your safety and proper Underwriters Laboratories (UL) certification.
.
Chapter 11 Replacing FRUs (for machine types: 3688, 3690, 3691, 3693, and 3695)
143