Installing The Solid State Drive - Lenovo ThinkStation E31 Hardware Maintenance Manual

7. Pull on the tips of the rubber mounts until the rear fan assembly is secured in place.
Figure 31. Installing the rear fan assembly
8. Connect the rear fan assembly cable to the system fan connector on the system board.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 118.

Installing the solid state drive

Attention:
Do not open your computer or attempt any repair before reading and understanding "Important Safety Information"
on page 1.
This section provides instructions on how to install the 2.5-inch solid state drive.
To install the solid state drive, do the following:
102
ThinkStation Hardware Maintenance Manual
5
6
7
8
3
4