Table of Contents
Advertisement
Replacing the power supply assembly
Attention
Although there are no moving parts in your computer after the power cord has been disconnected, the
following warnings are required for your safety and proper Underwriters Laboratories (UL) certification.
Caution
1
Remove the computer cover. For details, see
2
Remove the front bezel. For details, see
3
Pivot the drive bay assembly upward. For details, see
4
Disconnect the power supply assembly cables from the system board.
5
Replace the power supply assembly.
1
6
Connect the new power supply assembly cables to the system board.
7
Reinstall the removed parts. To complete the replacement, see
Replacing CRUs
Do not open your computer or attempt any repairs before reading the Important
Product Information Guide.
Never remove the cover on a power supply or any part that has the following label
attached.
Hazardous voltage, current, and energy levels are present inside any component that
has this label attached. There are no serviceable parts inside these components. If you
suspect a problem with one of these parts, contact a service technician.
Replacing the front bezel.
Removing the computer cover.
Pivoting the drive bay assembly upward and downward.
2
Completing the parts replacement.
36
Advertisement
Table of Contents
