Configuring Bridge Mib Extensions - Enterasys Vertical Horizon VH-8G Management Manual

Configuring Bridge MIB Extensions

The Bridge MIB includes extensions for managed devices that support
Traffic Classes, Multicast Filtering and Virtual LANs. To configure these
extensions, use the Extended Bridge Configuration screen as shown
below:
Use <TAB> or arrow keys to move. <Space> to scroll options.
Parameter
Bridge Capability
Extended Multicast
Filtering Services
Traffic Classes
Static Entry
Individual Port
Configurable
PVID Tagging
Local VLAN
Capable
42 VH-8G User Interface
Vertical Horizon Local Management -- VH-8G
Extended Bridge Configuration
Bridge Capability : (Read Only)
Extended Multicast Filtering Services: NO
Traffic Classes
Static Entry Individual Port
Configurable PVID Tagging
Local VLAN Capable
Bridge Settings :
Traffic Class
VLAN Learning
GMRP
GVRP
<APPLY>
Figure 2-32. Extended Bridge Configuration
Description
Indicates that the switch does not support the filtering of individual
multicast addresses based on GMRP (GARP Multicast
Registration Protocol). Note that this function is not implemented
for the current firmware release.
Indicates that the switch provides mapping of user priorities to
multiple traffic classes. (Refer to 802.1P Configuration.)
Indicates that the switch allows the static filtering for unicast and
multicast addresses. (Refer to Network Monitor Menu / Static
Unicast Address Table Configuration and Static Multicast
Address Table Configuration.)
Indicates that the switch allows you to override the default PVID
setting (Port VLAN ID used in frame tags) and its egress status
(VLAN-Tagged or Untagged) on each port. (Refer to Port
Assignment VLAN Configuration.)
This switch does not support multiple local bridges (that is,
multiple Spanning Trees).
: TRUE
: SVL
: DISABLED
: DISABLED
<OK> <CANCEL>
: YES
: YES
: YES
: NO
VH-8G