Craftsman 315.115210 Operator's Manual page 6

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-
tion of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
rain Minutes Time
"%, Alternating Current Type of current
---= Direct Current Type or a characteristic of current
no No Load Speed Rotational speed, at no load
[] Class II Construction Doubleqnsulated construction
.../rain Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator's Manual To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Eye Protection Always wear safety goggles or safety glasses with side shields
and a full face shield when operating this product.
Alert Precautions that involve
Safety your safety.
_ Failure to keep your hands away from the blade will result in
No Hands Symbol serious personal injury.
No Hands Symbol Failure to keep your hands away from the blade will result in
serious personal injury.
No Hands Symbol Failure to keep your hands away from the blade will result in
serious personal injury.
No Hands Symbol Failure to keep your hands away from the blade will result in
serious personal injury.
6