Craftsman 315.115210 Operator's Manual page 11

3/8 in. cordless drill-driver variable speed / reversible 13.2/15.6 volt
Hide thumbs

Advertisement

SWITCH
See Figure 2,
To turn your drill ON, depress the switch trigger. To turn it
OFF, release the switch trigger.
FORWARD/REVERSE/CENTER
LOCK
SELECTOR
TO INSTALL
BATTERY
PACK
Lock switch trigger on this drill by placing the direction
of rotation se{ector in center position. See Figure 4.
Place battery pack in this drill Align raised rib on
battery pack with groove inside drill. See Figure 3.
VARIABLE SPEED
SWITCHTRIGGER
Fig. 2
VARIABLE
SPEED
This tool has a variable speed switch that delivers higher
speed and torque w{th increased trigger pressure. Speed is
controlled by the amount of switch trigger depression.
Note: You might hear a whist{ing or ringing noise from the
switch during use. Do not be concerned, th{s is a normal
part of the switch function.
BATTERY PACK
LATCHES
\
DEPRESSLATCHES TO
RELEASEBATTERY PACK
Fig. 3
Make sure the latches on each s{de of your battery
pack snap {n place and battery pack is secured {n drill
before beginning operation.
CAUTION:
When placing battery pack in your drill,
be sure raised rib on battery pack aligns with groove
inside drill and latches snap into place properly.
Improper assembly of battery pack can cause
damage to internal components.
TO REMOVE
BATTERY
PACK
Lock sw{tch trigger on your dr{ll by p}ac{ng the direct{on
of rotation se{ector {n center position.
See Figure 4.
Locate latches on side of battery pack and depress to
release battery pack from your drill See Figure 3.
Remove battery pack from your dr{ll.
11

Advertisement

loading

  Related Manuals for Craftsman 315.115210

This manual is also suitable for:

315.115200