Change Thespark Plug - Craftsman C950-52948-0 Owner's Manual

CHANGE THESPARK PLUG
Remove the Snow Hood
1. Remove thechokecontrolknob(A,Figure27).
2. Remove thesafety key(B).
3. Remove themounting screws (A, Figure28).
4. Slowlyremove thesnowhood(B) Makesurethat theprimerbutton
hose(C)andtheignitionwire(D)arenotdisconnected.
5. Thesparkplug (E)cannowbe accessed.
6. Toinstallthe snowhood,first make surethatthe primerbuttonhose
andtheignitionwireareconnected.
7. Mountthesnowhoodto theengine andsecure with themounting
screws.
8. Connect t hechokecontrolknob(A,Figure29) with thechokeshaft
on thecarburetor ( B).Makesurethechoke controlknobis properly
installed.If thechokecontrolknobis notinstalled correctly, t hechoke
will notoperate.
9. Installthesafetykey(C).
i
SnowThrowerEngine
Figure 27
Removing theSnowHood
Connecting ChokeControlKnob
MAINTENANCE
Figure 28
Figure 29
25