Maintenance; Servicerecommendations - Craftsman C950-52948-0 Owner's Manual

MAINTENANCE
SERVICERECOMMENDATIONS
FIRST BEFORE AFTER EVERY EVERY EVERY BEGINNING
BEFORE
PROCEDURE 5 EACH EACH 5 10 25 EACH
STORAGE
HOURS USE USE HOURS HOURS HOURS SEASON
Check to MakeSure
AugerBladeStopsWithin
5 Seconds AfterRight v"
SAFETY ControlLeveris Released
Lubricate ControlLevers ,/ ,/ ,/
andLinkages
CheckSnowthrower for
LooseHardware v" ,,,"
Lubricate HexShaft a nd
Chains v" v"
Lubricate AugerShaft
Fittings v" v"
SNOWTHROWER Lubricate ChuteRotation
GearandDeflector v"
Mechanism
Remove All Snowand
Slushoff Snowthrower to
Prevent F reezing of Auger
or Controls
v"
CheckTirePressure ,/
L_______ i i ,,,,, i
Oil,Check
,/ v" ,/ v"
Oil,Change ,/ v"
ENGINE
Check and Replace
SparkPlug v" v"
NOTE:The warrantyon this snowthrower does not cover items
that have been subjectedto operator abuse or negligence.To
receive full value from the warranty, operator mustmaintain
snowthroweras instructedin this manual.
TheaboveService Recommendations aresuppliedto assisttheopera-
tor to properlymaintain thesnowthrower.
A
CAUTION:Do not allow grease or oil to contactthe
rubberfriction wheel or the disc drive plate, if the
disc drive plate or friction wheel come in contactwith
grease or oil, damage to rubberfriction wheel will
result.
NOTICE:if grease or oil comesinto contactwith the disc drive
plate or friction wheel, make sure to clean plate and wheel
thoroughly with an alcohol base solvent.
22