Unpacking Contents; Tools Needed For Assembly - Craftsman 244200 Owner's Manual

f
UNPACKI
G CONTENTS
The Craftsman model 113.244200 Band Saw is shipped
complete in one carton.
Separate all parts from packing materials and check
each one with the illustration and the list of Loose
Parts to make certain all items are accounted for,
before discarding any packing material.
If any parts are missing, do not attempt to assemble
the band saw, plug in the power cord or turn the
switch on until the missing parts are obtained and are
installed correctly.
For your own safety, never connect
plug to power source outlet until
all assembly steps are complete, and you have read
and understand the safety and operational instruc-
tions.
7
1
Packages of miscellaneous small parts consisting of the
following:
KEY
NO. PART NAM E QTY.
1. MITER GAUGE ...................... 1
2. BLADE GUARD ...................... 1
3. BLADE INSERT ...................... 1
4. THRUST ROLLER .................... 2
5. MITER GAUGE SCREW ................ 1
6. BLADE 1/4" x 62" LONG ............... 1
7. MITER GAUGE EXTENSION ............... 1
2
3
J
f
TOOLS NEEDED FOR ASSEMBLY
MEDIUM _ MEDIUM PHILLIPS
SCREWDRIVER _ SCREWDRIVER
5/32 inch HEX WRENCH f'_
I/2 inch OPEN WRENCH
_,,,,,,,,, SMALL COMBINATION SQUARE
1/2 inch SOCKET,
EXTENSION AND
RATCH ET.
COMBINATION SQUARE MUST BE TRUE
STRAIGHT EDGE OF BOARD
3/4" THICK. THIS EDGE MUST BE
DRAW LIGHT LINE ON PERFECTLY STRAIGHT.
BOARD ALONG THiS EDGE. ,_\
X
SHOULD BE NO GAP OR OVERLAP
HERE WHEN SQUARE IS FLIPPED
OVER IN DOTTED POSITION.
J
Page 5