Craftsman 536.881112 Operator's Manual page 9

NOTE: If the cables have become dis-
connected, connect cables as shown in
Figure 7.
Traction Drive Cable Auger Drive Cable
How To Install The Knobs
Remote Chute Knob
Figure 7
1. Assemble the remote chute knob
onto the lever until snug against the
nut (see Figure 8).
LIp
Remote
Chute
Knob
Nut
//_--"" Lever
Figure 8
2. Make sure lip on the remote chute
knob is pointed toward the engine.
3. Tighten the nut against the bottom
of the remote chute knob,
Speed Select Knob
Install the speed select knob to the
speed select lever. See Figure 9.
Speed Select
Lever
Figure 9
F-011047L 9