EverFocus ENDEAVOR EDRHD-2H14 User Manual page 19

5) VGA Main Monitor Out: Connect a VGA monitor to the VGA output connection. DVR can auto detect
the best resolution from the connected VGA monitor. If DVR detection fails, the default resolution will be
1920x1080 60Hz vertical, 68 KHz horizontal.
6) HDMI Main Monitor Out: Provides an uncompressed all-digital video interface between the HD DVR
and HDMI-compatible monitor. HDMI output format is 1920x1080p 60Hz vertical, 68 KHz horizontal.
7) Alarm In: Connect up to 16 alarm inputs, selectable between N.O./N.C. contacts.
8) Alarm Out: N.C or N.O type alarm out (form "C").
9) Audio In 4x RCA, others on DIN connector: Connect line level output of an audio preamplifier to the
audio input connection corresponding to the appropriate camera.
10) Audio Out: Connect to the line level input of an audio amplifier
11) HD-CCTV Video In (CH15~16) (2H14 only): Connect HD-SDI camera's video output (CH15~16) or
other HD-SDI video source to the video input connection.
12) HD-CCTV Video In (CH5~8) (4H4 only): Connect HD-SDI camera's video output (CH5~8) or other
HD-SDI video source to the video input connection.
13) Analog Video Input and looping (CH1~14) (2H14 only): Connect camera's video output (CH1~14) or
other composite video source to the video input connection.
14) Analog Video Input and looping (CH1~4) (4H4 only): Connect camera's video output (CH1~4) or
other composite video source to the video input connection.
15) eSATA: Used for external SATA HDD bay. Note: Hot-swappable model does not support eSATA.
.
10