Power Menu; Acpi Apic Support; Apm Configuration - Asus TS150-E2 User Manual

5.5

Power menu

The Power menu items allow you to change the settings for the ACPI and
Advanced Power Management (APM). Select an item then press <Enter> to
display the configuration options.

ACPI APIC Support

APM Configuration

Hardware Monitor
5.5.1 5.5.1 5.5.1 ACPI APIC Support [Enabled] ACPI APIC Support [Enabled] ACPI APIC Support [Enabled]
5.5.1 5.5.1 ACPI APIC Support [Enabled] ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power
Interface (ACPI) support in the Advanced Programmable Interrupt
Controller (APIC). When set to Enabled, the ACPI APIC table pointer is
included in the RSDT pointer list. Configuration options: [Disabled]
[Enabled]
5.5.2 5.5.2 5.5.2 APM Configuration APM Configuration APM Configuration
5.5.2 5.5.2 APM Configuration APM Configuration
APM Configuration
Restore on AC Power Loss
Power On By RTC Alarm
Power On By External Modems
Power On By PCI Devices
Power On By PS/2 Keyboard
Keyboard Wakeup Password : Not Installed
Power On By PS/2 Mouse
Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state,
whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
5 - 3 0 5 - 3 0 5 - 3 0 5 - 3 0 5 - 3 0
[Enabled]
[Last State]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
C h a p t e r 5 : M o t h e r b o a r d i n f o r m a t i o n C h a p t e r 5 : M o t h e r b o a r d i n f o r m a t i o n C h a p t e r 5 : M o t h e r b o a r d i n f o r m a t i o n C h a p t e r 5 : M o t h e r b o a r d i n f o r m a t i o n C h a p t e r 5 : M o t h e r b o a r d i n f o r m a t i o n
Select the ACPI state
used for System
Suspend.
Go into On/Off or
Suspend when Power
button is pressed.