Asus TS150-E2 User Manual page 44

To install a Serial ATA hard disk
drive:
1. Insert an HDD to the lower
bay of the drive cage. Make
sure that the HDD screw holes
align with the drive cage
screw holes.
D O N O T D O N O T D O N O T install a hard disk
D O N O T D O N O T
drive to the upper cage of
the bay.
2. Secure the HDD to the cage
with two screws (with metal
washers) on each side of the
bay.
3. Connect one end of the 7-pin
Serial ATA cable to the
connector at the back of the
drive.
3 - 4 3 - 4 3 - 4 3 - 4 3 - 4 C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s