Unpacking And Preassembly; Unpacking And Checking Contents - Craftsman 113.198310 Owner's Manual

unpacking and preassembly
WARNING: TO AVOID INJURY FROM UNEXPECT-
ED STARTING OR ELECTRICAL SHOCK, DO NOT
PLUG THE POWER CORD INTO A SOURCE OF
POWER UNTIL ALL ASSEMBLY AND ALIGNMENT
STEPS ARE COMPLETE. THIS CORD MUST
REMAIN UNPLUGGED WHENEVER YOU ARE
WORKING ON THE SAW.
Model 113.198310 Radial Saw is shipped complete
in one box.
1. Unpacking and Checking Contents
(a) Separate all "loose parts from packaging
materials and check each item with "Table of
Loose Parts" to make sure all items are
accounted for, before discarding any packing
material.
WARNING: IF ANY PARTS ARE MISSING, DO NOT
ATTEMPT TO ASSEMBLE RADIAL ARM SAW,
PLUG IN THE POWER CORD, OR TURN THE
SWITCH ON UNTIL THE MISSING PARTS ARE
OBTAINED AND ARE INSTALLED CORRECTLY.
LOOSE PARTS LIST FOR MODEL 113.198310
Item Description Qty.
M Bag of Loose Parts #507495 ............ 1
Containing the Following Items:
A Foot Leveling .................... 4
B Nut Hex Jam 1/2-13 .............. 8
C Screw, Truss Hd. 1/4-20 x 1/2 ..... 48
D Lockwasher Ext. 1/4 .............. 48
E Nut Hex 1/4-20 ................... 48
F Screw, Pan Hd.
Ty "BT" 1/4 x 1/2 ................ 8
G Screw, Pan Hd. Ty B #10 x 1 ....... 6
° @ °
® @
F G
Item Description Qty.
A Basic Saw Assembly ................... 1
B Owners Manual ....................... 1
C Fence, Rip ............................ 1
D Table, Rear ........................... 1
E Table, Spacer ......................... 1
F Cap Trim, L.H ......................... 1
G Cabinet Asse'mbly ..................... 1
H Handwheel Assembly .................. 1
I Trim Ledge ........................... 1
J Cap Trim, R.H ......................... 1
K Arbor Wrench ......................... 1
L Shaft Wrench ......................... 1
N Bag of Loose Parts #50749._.Z7 ............
1
Containing the Following Items:
A Pad Guard ....................... 1
B Indicator Rip ..................... 2
C Indicator Bevel ................... 1
D Cap Motor Support ............... 1
E Plug Plastic ...................... 4
F Screw Pan Hd. 10-32 x 1/2 ........ 1
G Lockwasher Ext. #10 .............. 1
H Cover ............................ 2
I Switch Key ....................... 1
A
N M
/
D
E
E F
G I
lO
NOTE: Loose Parts Bag and Assembly Numbers
refer to three digits, underlined in example below, or
the I.D. Number printed on each bag or carton.
X04507488H000