Craftsman 113.198310 Owner's Manual page 12

7. Locate the four (4) corner brackets and use eight
(8) 1/4-20 x 1/2 truss head bolts, Iockwashers
and hex nuts to mount the corner brackets to the
shelf AS ILLUSTRATED. Tighten the nuts with a
7/16" wrench or socket.
i"
8. Locate the right and left side panels and eight (8)
1/4-20 x 1/2 truss head bolts, Iockwashers and
hex nuts to attach side panels to shelf. Mount the
bolts through the four holes as illustrated and
tighten with 7/16 wrench or socket. To assemble,
lay the side panel on its backside and stand th6
shelf up as illustrated.
BOTTOM SIDE
OF LOWER SHELF
RIGHT SIDE
PANEL
9. Locate the two (2) skirts and the eight (8) 1/4-20 x
1/2 truss head bolts, Iockwashers and hex nuts to
attach them to the top of the side panels. Attach
one to the front and one to the rear of the stand as
illustrated and hand tighten nuts.
10. Secure rear of lower shelf to right side and left
side panels using two (2) 1/4-20 x 1/2 truss head
bolts, Iockwashers and hex nuts. Hand tighten
nuts only at this time.
12