TOOL USE AND CARE
1. ALWAYS use clamps or other practical ways to secure and support the
workpiece to a stable platform. Holding the work by hand or against your
body is unstable and may lead to loss of control.
2. DO NOT force tool. Use the correct tool and blade for your application.
The correct tool and blade will do the job better and safer at the rate for which
it is designed.
3. DO NOT use tool if switch does not turn it "On" or "Off" Any tool that
cannot be controlled with the switch is dangerous and must be repaired.
4. ALWAYS disconnect the plug from the power source before making any
adjustments, changing accessories,or
storing the tool. Such preventive
safety measures reduce the risk of starting the tool accidentally.
5. ALWAYS store idle tools out of reach of children and other untrained
Tools are dangerous in the hands of untrained users.
6. ALWAYS maintain tools with care. Keep cutting tools sharp and clean.
Properly maintained tools with sharp cutting edges are less likely to bind
and are easier to control,
7. ALWAYS check for misalignment
or binding of moving parts, breakage
of parts, and any other condition that may affect the tool's operation. If
damaged, have the tool serviced before using. Many accidents are
caused by poorly maintained tools.
USE OF ACCESSORIES
FOR USE WITH THIS TOOL
8. ALWAYS use only accessories
that are recommended
for this tool.
Accessories that may be suitable for one tool may become hazardous
when used on another tool.
1. Tool service MUST BE performed only by Sears or other qualified repair
personnel. Service or maintenance performed by unqualified personnel could
result in a risk of injury.
2. When servicing a tool, ALWAYS use only identical replacement parts.
Follow instructions in the Maintenance
section of this manual. Use of
unauthorized parts or failure to follow Maintenance Instructions may create
a risk of electric shock or injury.