List Of Messages - Canon VIXIA HF S10 Instruction Manual

The camcorder is connected using the o ptional HTCot O0 HDMI CaNe, but there
is no picture or
sound from the HDTV.
- Disconnectthe BTC-tO0HDMI BaNe and then restore the connection or turn the camcorder
off and then on again.
The camcorder is connected using the optional HTCqO0 HDMICable, but HDfv]FCEC does not
work (cannot play back using the TV's remote control).
- Disconnectthe BTC-IO0HDMI cane and turn off the camcorder and the TV.After a short
while turn them on againand restorethe connection,
- [#_] 0 [Controlfor HDMI] is set to [Oft], Set it to [On] (C[_ 149),
- HDMPOEC is not activated on the connectedTV.Activate this function on the TV.
- Evenwith TVsets compatible with HDMPCEC the range of functions available differs depend-
ing on the type of TV.Referto the instruction manual of the connectedTV.
The computer doesn't recognize the carocorder even though the camcorder is connected
correctty.
- L[_._ or [_ 0 [USBConnectionType] is set to [DVDBurner]. Set it to [Computer/Printer]or
to [Connectand Set] (_ 146).
- Disconnectthe USB cane and turn oft the camcorder.After a sho_twhile, turn it on again and
restore the connection.
- Connect the camcorder to a different USBpod on the computer.
The printer is not working even though the camcorder and printer are connected correctly.
- r_ or [_] 0 [USBConnectionType] is set to [DVDBurner]. Set it to [Computer/Printer]or
to [Connectand Set] (EZ3 146),
- Disconnectthe USBcable and turn oft the printer.After a shod while turn it on againand
restore the connection.
The camcorder doesn't recognize the DWolOODVDBurner even though it is connected
correctty.
- r_ or [_ C _ [USBConnectionType] is set to [Computer/Printer].Set it to [DVD Burner]or
to [Connectand Set](C]3 146).
List of Messages (inalphabetical order)
Following the list of messages for the camcorder you can find separate
lists for print-related messages (EZ3 164) and for messages that appear
only when using the optional DWqO0 DVD Burner (Lq3 163).
Access error
- There was an error when reading the memory or attempting to write onto it.
- This message can also appear if condensation hasformed (_ 172). Wait until the cam-
corder dries compbtety before resuming use.
Ad:tora formater •
157