Canon VIXIA HF S10 Instruction Manual page 86

PmayHst and Scene Operations
Dividing Scenes
You can divide scenes (original scenes only) in order to leave out the
best parts and later cut out the rest.
1 Open the originaB movies index screen.
You can select the original movies in the built-in memory or on
the memory card (CZ3 51).
2 SeBect (AV, _) the scene you want to divide,
3 Press [¢urqd.i, seBect [_ Divide] and press O,
The scene selected will start playing back. Pause the playback at the
point where you want to divide the scene.
You can use the following icons to bring the scene to a precise point.
4_1/_ : Search (fast playback) backward/forward.
/_ : Skip to the beginning/end of the current scene.
4H/lib,:
Frame backward/forward.
Press Fu_.] or (_ to stop the playback and cancel the division of
the scene.
4 Select (_) the _2, icon and press O to divide the scene,
5 Select (_) [Yes] and press O"
The video from the division point to the end of the scene will appear as
a new scene in the index screen.
While dividing the scene, the scene playback will pause only at points
where the scene can be divided. Advancing/reversing frames will skip
only between such points as well, so the interval will be longer than in
regular frame advance/reverse.
The following scenes cannot be divided:
- Scenes included in the scene pre-selection (marked with a v<
checkmark). Remove the selection mark in advance.
- Video snapshot scenes and other scenes that are too short (less than
3 seconds).
86 * Vd_}<