Canon VIXIA HF S10 Instruction Manual page 78

To activate an effect
mode: Activate the selected effect while recording or in record
pause mode.
mode: Activate the selected effect and then press to
record the photo.
When you apply a fader, not only the picture but also the sound will fade
in or out. When you apply an effect, the sound will be recorded normally,
The camcorder retains the last setting used even if you deactivate the
selected digital effect or change the recording program.
Faders cannot be used when recording video snapshot scenes or when
pre-recording is activated.
0n-Screen Displays and Data Cede
You can turn most on-screen displays on or off.
Repeatedly press/6_s _€[} to turn the on-screen displays on/off in the
following sequence:
, [__ mode:
All displays on
Most displays off*
Full-screen display** (_)
mode:
All displays on
Data code only
All displays off
mode:
All displays on
Regular displays only (removes the histogram end information icons}
All displays off