Canon VIXIA HF S10 Instruction Manual page 93

Refer tothis chapter fordetails onshooting photos - taking
photos and playing them back, capturing photos from video
and printing photos.
Basic Recording
Taking Photos
!
1 Set the camera mode diaB to Oor
2 Turn on the camcordero
By default, photos are
recorded in the built-in memory. You
can set the memory card as the
recording media for photos (83 42).
3 Press haffwayo
Once the focus is automatically
adiusted, _ will turn green and one
or more AF frames will appear.
4 Press _ fully.
The ACCESS indicator will flash as the photo is being recorded.
Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder`
- Do not change the camcorder's operating mode.
Ph{: tos _,93