A) Basic Setup To Receive Faxes - Brother LaserFax IntelliFAX 3550 Owner's Manual

RECEIVING FAXESAND OTHERCALLS BASIC SETUP TO RECEIVE F AXES
The FIT Switch (Fax/Telephone Mode)
When you share one line for your telephone and fax machine, in the Ffr switch mode, the fax
machine can determine whether an incoming call is a fax or a telephone call. (See Chart below.)
I Incoming Call I
The fax machine
picks up after Ring I All extensions in the home I
Delay elapses. I will ring for 0-4 rings
I
I (Ring Delay-see page 7-2).
The fax machine picks up
the call and automatically
detects whether it is a fax
or voice call.
You pick up any
extension within Ring
Delay selection.
I ou must manually I
determine if it is a
voice or fax call.
Automatic I
fax caw
I Fax reception is
automatically
activated.
Voice call or
manual fax call
I
I The fax message
is received. I
The caller may
hang up, but
the F/T ringing
will continue
for 10-60
seconds.
Only the fax handset
rings (double ring)
for you to pick up.
The handset will ring
for 10-60 seconds
(F/r Ring Time-see
page 7-4).
The caller stays
on the line through
the entire 10-60 second
Ring Time.
I The fax mode ]
is activated.
I The caller may hang up. I
Automatic or
manual fax call
f
A) If you are at the
fax machine, press
START.
B) If you are at an
extension phone,
you can transfer
the fax call to the fax
unit by pressing your
Remote Activation
Code (three digits-see
page 7-10-12).
I Y°u pick uP I
the fax handset.
Talk as normal,
or press Start
key to receive a
manual fax.
Voice call
I Talk as I
normal. I
7-3