Brother LaserFax IntelliFAX 3550 Owner's Manual page 28

HOW TO USEON-SCREEN PROGRAMMING (OSP) AND HELP KEY
Level one
function
5. USER
OPTIONS
Level two
function
1. SMOOTHING
Explanation of Options
Smoothing enhances the appearance of
incoming faxes.
If you set SMOOTHING to ON, you will
receive messages with the smoothing
enhancement.
ON/OFF
Factory
setting Page
ON 7-4
You can adjust the volume of the beeper with
2. BEEPER this function. LOW 4-1~2
OFF/LOW/HIGH
3. COVERPG
ON/OFF
4. ERRORRE-TX
5. REDUCTION
6. RCD PAPER
7. TONER SAVE
If you set COVERPAGE to ON, you can send
your documents with a Cover Page generated
by your machine. When the COVERPAGE
setting is ON, you can select a Cover Page
comment.
ON/OFF
If you set ERROR RE-TRANSMISSION to
ON, the machine automatically sends the
page again after an error occurs.
ON/OFF
You can avoid having your incoming data
separated by printing a reduced copy of the
incoming document. The reduction methods
are AUTO or Fixed ratio:
AUTO/100%/93%/87%/75%
You can select one of 3 sizes of recording
paper. The machine automatically will adjust
the size of the incoming document or original
document so that it fits the paper size you
have selected.
LETTER/LEGAL/A4
You can extend the life of the toner by
conserving its use.
ON/OFF
This mode reduces power consumption when
the machine is idle. The time period before
the machine drops into Sleep Mode is user
selectable.
You can adjust Print Density with this
function.
8. SLEEP MODE
9. PRINT
DENSITY
OFF
OFF
AUTO
LETTER
OFF
OOMIN
6-16
6-20
7-6~7
7-5
7-8
3-9
7-8
3-4