Operating Without Using The Osd; Auto Standby - Sony STR-DN840 Operating Instructions Manual

x Auto Standby
Lets you set the receiver switch to standby
mode automatically when you do not
operate the receiver or when there is no
signals input to the receiver.
• On: Switches to standby mode after
approximately 20 minutes.
• Off: Does not switch to standby mode.
Notes
• This function does not work in the following
cases.
– "FM TUNER", "AM TUNER", "USB",
"HOME NETWORK", or "SEN" input is
selected.
– AirPlay or PARTY STREAMING function is
being used.
– The software of the receiver is being updated.
• If you use the Auto standby mode and the Sleep
Timer at the same time, the Sleep Timer has
priority.
x Network Update
Lets you update the software of the receiver
to the latest version.
For details, see "Updating the software"
(page 71).
To check the software version
1
Select "Network Update", then press
.
2
Select "Version", then press
The software version appears on the TV
screen.
x Update Alert
Lets you set whether or not to inform you of
newer software version information on the
TV screen.
• On
• Off
Operating without using
the OSD
You can operate this receiver using the
display panel even if the TV is not
connected to the receiver.
DISPLAY
RETURN
O
Using the menu on the
display panel
1
Press AMP MENU.
The menu is displayed on the display
panel of the receiver.
2
Press V/v repeatedly to select the
menu you want, then press
3
Press V/v repeatedly to select the
parameter you want to adjust, then
press
4
Press V/v repeatedly to select the
.
setting you want, then press
To return to the previous
display
Press B or RETURN O.
To exit the menu
Press AMP MENU.
Note
Some parameters and settings may appear
dimmed on the display panel. This means that
they are either unavailable or fixed and
unchangeable.
AMP MENU
V/v/B/b,
.
.
.
97
US