Sony STR-DN840 Operating Instructions Manual page 47

To operate the USB device
using the remote control
USB
SHUFFLE
REPEAT
N
X
x
Press USB before you use the following
buttons.
Press Operation
N
Starts play.
X
Pauses play.
x
Stops play.
./> Goes to the previous/next file.
REPEAT Enters repeat mode.
SHUFFLE Enters shuffle mode.
Notes on the USB device
• Do not remove the USB device during
operation. To avoid data corruption or
damage to the USB device, turn the
receiver off when connecting or
removing the USB device.
• Do not connect the receiver and the USB
device through a USB hub.
• When the USB device is connected,
"Reading" appears.
• It may take about 10 seconds before
"Reading" appears depending on the type
of USB device connected.
• When the USB device is connected, the
receiver reads all the files on the USB
device. If there are many folders or files
on the USB device, it may take a long
time to finish reading the USB device.
• The receiver can recognize up to
– 256 folders (including "ROOT" folder).
– 256 audio files for each folder.
– 8 folder levels (tree structure of files,
including "ROOT" folder).
./>
The maximum number of audio files and
folders may vary depending on the file
and folder structure.
Do not save other types of files or
unnecessary folders on a USB device.
• Compatibility with all encoding/writing
softwares, recording devices, and
recording media cannot be guaranteed.
Incompatible USB device may produce
noise or interrupted audio or may not play
at all.
• Some time may be needed to start
playback when:
– the folder structure is complex.
– the memory capacity is excessive.
• This receiver does not necessarily
support all the functions provided in a
connected USB device.
• The playback order for the receiver may
differ from the playback order of the
connected USB device.
• Folders that have no audio files are
skipped.
• When playing a very long track, some
operations may cause playback delay.
47
US