Functional Execution Command Table; Image Command Table; Display Command Table; Input Control Command Table - Sanyo PLV-HD2000 - 7000 Lumens Manual

PLV-HD2000 Expand Serial Command Functional Specifications
5． Functional Execution Command Table

5.1. Image Command Table

Execute command
CF_BRIGHT_%1 [CR]
CF_CONT_%1 [CR]
CF_COLOR_%1 [CR]
CF_TINT_%1 [CR]
CF_SHARP_%1 [CR]
CF_GAMMA_%1 [CR]
CF_WBAL-R_%1 [CR]
CF_WBAL-G_%1 [CR]
CF_WBAL-B_%1 [CR]
CF_COLTEMP_%1 [CR]
CF_NZRED_%1 [CR]
CF_PROGV_%1 [CR]
CF_IMAGE_%1 [CR]
CF_IMAGEADJ_%1 [CR]
CF_APCTRL_%1 [CR]
CF_BBAL_%1_%2_%3 [CR]

5.2. Display Command Table

Execute command
CF_FSYNC_%1 [CR]
CF_TODOTS_%1 [CR]
CF_CLAMP_%1 [CR]
CF_H-POS_%1 [CR]
CF_V-POS_%1 [CR]
CF_DLINE_%1 [CR]
CF_DDOTS_%1 [CR]
CF_SETDISPADJ_%1 [CR]
CF_ORGMODE_%1 [CR]
CF_MODESTORE_%1 [CR]
CF_MODEFREE_%1 [CR]

5.3. Input Control Command Table

Execute command
CF_INPUT_%1 [CR]
CF_SOURCE_%1 [CR]
CF_INPUT1_%1 [CR]
CF_INPUT2_%1 [CR]
CF_INPUT3_%1 [CR]
CF_INPUT4_%1 [CR]
CF_SYSTEM_%1 [CR]
Set value of Brightness
Set value of Contrast
Set value of Color
Set value of Tint
Set value of Sharpness
Set value of Gamma
Set Red value of White Balance
Set Green value of White Balance
Set Blue value of White Balance
Set value of Color Temp.
Set / Cancel Noise reduction
Set / Cancel Progressive
Set Image mode
Reset / Store adjusted values of Image
Set level of Auto Picture Control
Set value of Gamma Balance
Set value of Fine Sync
Set value of Total Dots
Set value of Clamp
Set value of Horizontal Position
Set value of Vertical Position
Set value of Display Line
Set value of Display Dots
Apply values set in PC Adj menu to screen image
Specify the original signal of the Display mode
Store values set in Display adjust menu to Mode ％1
Clear values stored in Mode %1 and return it to Free
status
Select Input %1
Select Input Source %1
Select Input 1 and Source %1
Select Input 2 and Source %1
Select Input 3 and Source %1
Select Input 4 and Source %1
Select System %1
Item
Item
Item
6/56