Advertisement
Available languages
Available languages
PRODUCT
REGRISTRATION
The Ariens dealer must register the product at the time of
purchase. Registering the product wilt help the company process
warranty claims or contact you with the latest service information.
All claims meeting requirements during the limited warranty period
wilt be honored, whether or not the product registration card is
returned. Keep a proof of purchase if you do not register your unit.
Customer
Note: If the dealer does not register your product,
please fill out, sign, and return the product registration
card to
Ariens or go to www.ariens.com.
DELIVERY
Customer Note: If you have purchased this product without
complete assembly and instruction by your retailer, it is your
responsibility to:
1. Read and understand all assembly instructions in this manual.
If you do not understand or have difficulty following the
instructions, contact your nearest Ariens Dealer for assistance.
Make sure all assembly has been properly completed and
safety interlock system works properly.
NOTE: To locate your nearest Ariens dealer, go to www.ariens.com
on the internet
,_
WARNING:
Improper assembly or adjustments can
cause serious injury.
2. Understand all Safety Precautions provided in the manuals.
3. Review control functions and operation of the unit. Do not
operate unit unless all controls function as described in this
manual.
4. Review recommended
lubrication, maintenance, and
adjustments.
5. Fill out Product Registration Card and return the card to Ariens
Company.
WARNING: This cutting machine is capable of
amputating hands and feet and throwing objects. Failure
to observe the safety instructions in the manuals and on
decals could result in serious injury or death.
Slopes are a major factor related to loss-of-control
and
tip-over accidents. Operation on all slopes requires extra
caution.
Tragic accidents can occur if the operator is not alert to
the presence of children. Never assume that children will
remain where you last saw them.
Gasoline is extremely flammable and the vapors are
explosive, handle with care.
Disengage attachment, stop unit and engine, remove key,
engage parking brake, and allow moving parts to stop
before leaving operator's position.
OLI253
1
&
SAFETY ALERT SYSTEM
These are safety alert symbols. They mean:
•ATTENTION !
•YOUR SAFETY IS INVOLVED!
When you see this symbol:
•BECOME ALERT!
•OBEY THE MESSAGE!
OL3900
SIGNAL WORDS
The safety alert symbols above and signal words below are used
on decals and in this manual.
Read and understand all safety messages.
,_
DANGER: IMMINENTLY HAZARDOUS
SITUATION! If
not avoided, WILL RESULT in death or serious injury.
WARNING:
POTENTIALLY
HAZARDOUS SITUATION!
If not avoided, COULD RESULT in death or serious
injury.
CAUTION:
POTENTIALLY
HAZARDOUS
SITUATION! If
not avoided, MAY RESULT in minor or moderate injury. It
may also be used to alert against unsafe practices.
NOTATIONS
NOTE: General reference information for proper operation and
maintenance practices.
IMPORTANT:
Specific procedures or information required to
prevent damage to unit or attachment.
PRACTICES
AND LAWS
Practice usual and customary safe working precautions, for the
benefit of yourself and others. Understand and follow all safety
messages. Be alert to unsafe conditions and the possibility of
minor, moderate, or serious injury or death. Learn applicable rules
and laws in your area, including those that may restrict the age of
the operator.
GB - 3
Advertisement
Chapters
