Ariens ProZoom 99480600-1952S Owner's/Operator's Manual page 10

WARNING: AVOID INJURY. Read and understand entire Safety section before proceeding.
Operator Station Controls
Daily Operating Checklist
• Make sure alt necessary guards and shields are safely and
securely attached. Check for loose, missing, or damaged
parts.
• Remove mower deck belt shields. Clean grass and debris from
belt area.
• Remove grass and debris from machine and mower deck.
• Remove grass and debris from operator station foot plate,
pump drive belt compartment, hydraulic pump and pump
mounting plate.
• Test park brake.
• Test safety systems.
• Check battery.
• Check
• Check
• Check
• Check
• Check
• Adjust
• Check
• Check
• Check
for oil leaks.
engine oil and hydraulic oil levels.
all belts for damage or cracking.
engine air filter.
mower level.
cutting height if necessary.
wheel bolt torque. Tighten if necessary.
tire air pressure. Check tires for damage or cracking.
and adjust speed control linkages and lock.
Avoid Damage to Plastic and Painted
Surfaces
• Do not wipe plastic parts unless rinsed first.
• Insect repellent spray may damage plastic and painted
surfaces. Do not spray insect repellent near machine.
• Be careful not to spill fuel on machine. Fuel may damage
surface. Wipe up spilled fuel immediately.
• Prolonged exposure to sunlight will damage the hood surface.
Picture Note:
A. Speed Control Bar Lock
B. Speed Control Bar
C. Left Motion Control Lever
D. Right Motion Control Lever
E. Hydrostatic Oil Reservoir Cap and Dipstick
F. Ignition Key Switch
G. Fuel Tank Cap
H. PTO Switch
I. Hour Meter
J. Choke
K. Throttle Lever
L. Park Brake Lever
Miscellaneous Controls
A. Free-Wheeling Valves
GB- 10