Settings You Can Change With User Tools; General Features - Ricoh Aficio 3515MF Operating Instructions Manual

UserTools (SystemSettings)
Settings You Can Change with User Tools
¢O Reference
To access User Tools, see p.26 "Accessing User Tools (System Settings)".
General F eatures
o:. Panel Tone
The beeper (key tone) sounds when a key is pressed.
Note
Default: On
*:* Copy Count Display
The copy counter can be set to show the number of copies made (count up),
or the number of copies yet to be made (count down).
Note
0 Default: LIp (count up)
o:÷ Function Priority
You can specify the mode to be displayed immediately after the operation
switch is turned on, or when System Reset mode is turned on.
Note
Default: Copier
o:. Print Priority
Set the print priority for each mode.
,JD Reference
p.21 "Multi-Access"
Note
Default: Display mode
When [Interleave] is selected, the current print job will be interrupted after
a maximum of five sheets.
o:* Display Contrast
You can adjust the brightness of the display.
.:. Key Repeat
You can select whether or not to use the key repeat function.
_:_ Note
Default: On
28