4.
Click the Device Settings tab.
5.
Select Job Storage.
6.
Select the Disabled option.
If the job-storage feature is enabled (without installing a hard disk but with at least 288 MB of total
memory–installed memory number is available on the product configuration page in the Memory
section), two Job Storage Mode settings are available on the Job Storage tab:
Proof and Hold
●
Personal Job
●
Two additional Job Storage Mode settings become available on the Job Storage tab if a hard
disk is installed:
Quick Copy
●
Stored Job
●
The following figure shows the Job Storage tab.
Figure 3-17
The Job Storage tab contains the following controls:
ENWW
Job Storage tab
Job Storage tab features
91