Figure 2-1 Software Installation - License Agreement Screen - HP LaserJet Enterprise 500 Reference

NOTE: You can return to the previous dialog box by clicking the Back button, or exit the printing-
system software installation by clicking the Cancel button.
1. Close all programs.
2.
Insert the printing system software CD into the CD-ROM drive. The software installer detects the
language of the operating system, and then displays the main menu of the installation program in
the same language.
If the installer program has not started after 30 seconds, complete these steps:
a. On the Start menu, click the Run option.
b.
Type the following: X:\SETUP.EXE (where X is the letter of the CD-ROM drive).
c. Click the OK button. The installer program starts.
3. Read the license agreement, click the I have reviewed and accept the installation
agreements check box, and then click the Next button to continue to the Connection Type
screen.
Figure 2-1
4. The Preparing to Install screen appears. It may take several minutes before the installer
proceeds to the next screen.
32 Chapter 2 Install Windows software and utilities
Software installation — License agreement screen
ENWW