Removing External Fonts; Installable Options; Automatic Configuration - HP LaserJet Enterprise 500 Reference

Removing external fonts

1. In Windows Vista and Windows 7, click the Start button, click Control Panel, click
Hardware and Sound, and then click Printers.
In Windows XP, Windows Server 2003, and Windows Server 2008, click Start, click Settings,
and then click Printers and Faxes.
2.
Right-click the name of the product.
3. In Windows Vista, Server 2003 and XP click Properties, in Windows 7 and Server 2008 click
Printer Properties.
4. Click the Device Settings tab.
5. Click the External Fonts option. The Properties button appears.
6. Click Properties. The HP Font Installer dialog box appears. The external fonts that are
installed appear in the Installed Fonts window.
7. Select the fonts that you want to remove, and then click Remove. The fonts are removed.
8. Click OK to close the HP Font Installer dialog box.

Installable Options

Items under Installable Options are set based on the current printer configuration when the driver is
installed.
The HP LaserJet Enterprise 500 color M551 product has printing options that you can install and
configure in this section. The following controls are available:

Automatic Configuration

●
Printer Status Notification
●
Tray 3
●
Duplex Unit (for 2-Sided Printing)
●
Allow Manual Duplexing
●
Printer Hard Disk
●
Job Storage
●
Secure Printing
●
Job Separator
●
Mopier Mode
●
Automatic Configuration
Use the Device Settings tab to tell the driver about the hardware configuration of the product. If
bidirectional communication is enabled in a supported environment, update this tab by selecting the
ENWW
Device Settings tab features
111