Using A Xd-Picture Card; Using Bluetooth Communication; Selecting Images For Printing - Sony UP-CR10L Operating Instructions Manual

Using a xD-Picture Card

Inserting the xD-Picture Card
With the v mark on the xD-Picture Card facing up and
forward, completely insert the xD-Picture Card into the
slot.
When you insert the xD-Picture Card into the unit, it is
automatically detected.
Removing the xD-Picture Card
When you see a message that prompts you to remove the
xD-Picture Card, first push the xD-Picture Card until you
hear a click, then pull it out.
Note
To prevent losing valuable data or damaging the xD-
Picture Card, never remove the xD-Picture Card from the
slot until the message prompts you to remove it.

Using Bluetooth communication

Using an optional Bluetooth USB adaptor, you can send
images wirelessly from Bluetooth-compatible devices
such as mobile phones. For details on sending images
using Bluetooth communication, see "Printing With
Bluetooth® Communication" on page 50.
The following sections give explanations on how to print
images from a memory card. The same procedure can be
used to print images sent using Bluetooth communication.
34

Selecting Images for Printing

Selecting Images for
Printing
The procedure for selecting images from the inserted
memory card is described below.
This procedure can be carried out in any operation mode.
1
Touch any place on the screen.
The language selection screen appears.
Memo
When using Event mode, and when only one language
was selected at the administration screen, the language
selection screen does not appear. Instead, the Main
Menu appears. In this case, proceed to step 3.
2
Touch the language you want to use.
Precautions about using the unit are shown. Read these
carefully and then touch the [OK] button.
When a Bluetooth USB adaptor is inserted and
Bluetooth communication is enabled, the device
selection screen appears. Touch [Memory Card].