Sony UP-CR10L Operating Instructions Manual page 42

2
Touch the language you want to use.
Precautions about using the unit are shown. Read these
carefully and then touch the [OK] button.
When a Bluetooth USB adaptor is inserted and
Bluetooth communication is enabled, the device
selection screen appears. Touch [Memory Card].
3
Insert the memory card into the respective slot on the
front side of the unit.
When the memory card is recognized, the Main Menu
appears.
4
Touch [Border Print].
The border selection screen appears.
42
Using Border Print
5
Select the desired border by touching it, and then touch
the [OK] button.
If you wish to enlarge the selected border, touch the
button.
A list of images stored on the memory card is shown.
6
Select the image to be printed by touching it.
To deselect an image that you have selected, touch that
image again. To select all images, touch the [Select
All] button.
If there are more images than fit on one list display
screen, the [b] and [B] buttons can be used to move
among screens.