Sony vaio vgn-txn15p: supplementary guide (40 pages)
Summary of Contents for Sony UP-CR10L
Page 1
User’s Guide This guide describes how to install and use the Adobe Photoshop plug-in module needed to create border printing templates for the UP-CR10L. Before Using this Software Before using the plug-in module, be sure to read the “ReadMe” file located on the CD-ROM.
Creating a Template ...4 Workflow for Template Creation and Use ...4 Creating Image Data ...4 Using the Plug-in Module ...5 Transferring Templates to the UP-CR10L ...5 Created Folders and Files ...6 Windows 2000 Adobe and Photoshop are trademarks of Adobe Systems Incorporated.
The UP-CR10L Photoshop plug-in module is software that allows using Adobe Photoshop to create templates for the border print function of the UP-CR10L. When the plug-in module is installed, you can use your own image data to automatically create all required template files and folders.
When template data is output to a drive other than the expansion CompactFlash card Use a memory card to copy the template data to the expansion CompactFlash card of the UP-CR10L. The created template can be used. Creating Image Data First, you should create image data containing the frame design.
The folder cannot be specified. If your computer can use CompactFlash cards, insert the expansion CompactFlash card of the UP-CR10L into your computer, and specify the corresponding drive. Template data are always stored in a folder named “\Sony\UPCR\template\(paper size)” on the specified drive.
Copy the template data from the memory card to the expansion CompactFlash card of the UP- CR10L, using template tab of the administration screen. For details on operations with the UP-CR10L, refer to the UP-CR10L Operating Instructions. Created Folders and Files When the plug-in module is used, the following folders and files are created on the destination drive.