Using Index Print - Sony UP-CR10L Operating Instructions Manual

Using Index Print

This function prints out all images on a memory card in
reduced size to provide an index of the contents.
The maximum number of images printed on a single sheet
is as follows.
• 3×5": 30 images
• 4×6": 35 images
• 5×7": 56 images
This function is available in Full mode and Event mode.
Note
Exif images, which exceed the maximum number of pixels
to be handled (8,000(H) × 6,000(V)), can also be index
printed. However, the images are not supported and cannot
be printed with functions other than index print, and the
following icon will appear with other functions.
1
Touch any place on the screen.
The language selection screen appears.
Memo
When using Event mode, and when only one language
was selected at the administration screen, the language
selection screen does not appear. Instead, the Main
Menu appears. In this case, proceed to step 3.
38
Using Index Print
2
Touch the language you want to use.
Precautions about using the unit are shown. Read these
carefully and then touch the [OK] button.
When a Bluetooth USB adaptor is inserted and
Bluetooth communication is enabled, the device
selection screen appears. Touch [Memory Card].
3
Insert the memory card into the respective slot on the
front side of the unit.
When the memory card is recognized, the Main Menu
appears.
4
Touch [Index Print].
The order contents are shown.
Memo
In Event mode, the order contents are not shown and
printing starts directly.
5
Verify the order contents and enter the password.
For details on this operation, see "Verifying Order
Contents and Entering a Password" on page 37.