Dell C1660w Color Laser Print User Manual page 108

Trap Notification 1-4
Authenticate Error Trap
1
* The default value can be changed by using Dell Printer Configuration Web Tool.
106
Dell™ Printer Configuration Web Tool
Re-enter Community Name
*1
(Read/Write)
*1
Community Name (Trap)
Re-enter Community Name
*1
(Trap)
Trap Address Type
Trap Address
Port Number
Notify
Enter the community name to access (read and write) data again to
confirm.
Specifies the community name used for trap up to 31
alphanumeric characters.
The original setting will remain valid if nothing is entered.
Characters entered for community name in the previous settings
will not be displayed on the screen. The default Trap Community is
" " (NULL).
Enter the community name used for trap again to confirm.
Select the trap address type from the list. Selecting Off clears the
settings in Trap Address, Port Number, and Notify, and does not
notify trap occurrence. Selecting IPv4 or IPv6 allows you to enter
Trap Address.
Specifies the IP address and IP socket in the following format:
• IPv4
Specifies the IP address and IP socket in the
nnn.nnn.nnn.nnn:mmmmm format. Each section of "nnn" is a
variable value between 0 and 255. Note that values 127 and 224-
254 are not valid for the first three-digits only. The IP socket
mmmmm is a variable value between 0 and 65535.
• IPv6
Specifies the IP address and IP socket in the
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmmmm format. Each
section of "xxxx" is a hexadecimal variable value between 0 and
ffff. The IP socket mmmmm is a variable value between 0 and
65535.
Enter the SNMP trap destination port number.
Specifies whether to notify trap occurrence.
Specifies whether to notify Authenticate Error Trap.