Advertisement
First, remove the two screws and lock washers already attached to the sideburner valve bracket. Position sideburner
valve bracket beneath sideburner shelf fascia so that valve stem comes through larger center hole in fascia. Align the holes
on valve bracket with left and right holes on fascia. Secure using lock washers and screws that were removed from bracket.
Next, place sideburner bezel over valve stem on front side of fascia. Align small holes on bezel with upper and lower holes on
fascia. Attach using two #8-32x3/8" screws and 4ram lock washers. Press sidebumer control knob onto valve stem.
4ram lock washer
#8-32x3/8" screw
Qty.2
Qty.2
Note: Use upper and lower
holes on fascia to
attach bezel
//
|
/"
/
/
i
]
Lockwashers,
/
Control
Screws and Washers
removedfrom valve bracket
Sideburner
valvebracket
4ram
lockwasher
#8-32x3/8"screw
Sideburner controlknob
Insert sideburner burner into left shelf.The stud on bottom of burner fits into rear small hole in sidebumer drip pan on
shelf, shown A. Secure burner to sidebumer drip pan with one Wing nut, shown B. Make sure burner tube engages
sidebumer valve, shown C.
Wing nut
.............
Qty.1
Sideburner burner
Sidebur_er drip pan
Wing nut
Sideburner drip pan
464222209.21
Advertisement
