Kenmore 464222209 - Grill With 100% Infrared Cooking System Use And Care Manual page 12

rii| alogen Light
LIGHT OPERATION iNSTRUCTiONS
1. Make sure light switch on the control panel is in the "OFF" position.
2. Connect light plug to an extension cord, then put the extension
cord plug into the outlet on the wall.
3. Turn the light switch to "ON".
• Keep any electrical supply cord away from any
heated surface.
• Use the shortest length extension cord required.
Do not connect 2 or more extension cords together.
.
Light
.
.
cord,
for out door use
Bulb Replacement
A Make sure light switch on the control pane[ is in the "OFF" position and adapter plug is disconnected from outlet.
Release the screw securing the light
socket.
Take out the socket and remove the lens.
Loosen the two screws which are
locking the bulb.
Pull out the bulb and replace
with a new bulb.
Reverse instructions from step 3
through step 1 to re-install socket.
cAuTio.Jl !
Takecarenotto touch the bulb withyour barefingers.
Touching bulbwithyour skin canleavea fikn on the
bulb that causesitto burn out quickly.
Bulb Specification
BulbType:Halogen
Wattage:10 W per bulb
Voltage:12V
12. 464222209 Continued on next page