Attach debris collector panel to upper back panel using four #10x3/8" screws, 5ram flat washers, 5ram lock washers,
and #10 nuts, shown A.
On back of grill, place upper back panel between side panels and above lower back panel. Secure upper back panel, in
lower holes, using one l/4-20xllA '' screw and 7ram lock washer on each side. In upper holes, use one l/4-20xllA ''
screw and 7ram lock washer on each side, shown B. On the cart, secure upper back panel to lower back panel using
one 1/4-20x1/2" screw and 7ram lock washer, shown C.
lr
#10×3/8, screw
O
5ram lock washer
_
#10 Nut
Qty.4
Qty.4
Qty.4
5ramflat washer
Qty.4
El
#10×3/8"screw
--%
1/4-20×11/2" screw
Qty.4
1/4-20×1/2"Screw
7ramLock washer
Qty.1
Qty.5
Debris collecter
panel
I
5ramflat washer
5ram
#10 Nut
)er back panel
SIDEViEW
Debris collecter panel
washer screw
20,464222209