(Figure 4.4.6.7: Slot 4 is set as a global spare disk.)
Step 5: Done.
Delete VDs, RG, please follow the below steps.
Step 6: Detach a LUN from the VD.
In "/ Volume configuration / Logical unit",
1.
Check the gray button next to the LUN; click "Detach". There will pop up a
confirmation page.
2.
Choose "OK".
3.
Done.
Step 7: Delete a VD (Virtual Disk).
To delete the virtual disk, please follow the procedures:
1.
Select "/ Volume configuration / Virtual disk".
2.
Check the gray button next to the VD number; click "Delete". There will pop up a
confirmation page, click "OK".
3.
Done. Then, the VD is deleted.
Tips
When deleting VD directly, the attached LUN(s) of to this VD will be
detached together.
Figure 4.4.6.7
Figure 4.4.6.8
68