D-Link DSN-6120 User Manual page 120

INFO BBM status good
INFO BBM status
charging
WARNING BBM status fail
INFO BBM enabled
INFO BBM inserted
INFO BBM removed
JBOD events

Level
INFO PD upgrade started
INFO PD upgrade
finished
WARNING PD upgrade failed
INFO PD freed
INFO PD inserted
Warning PD removed
ERROR HDD read error
ERROR HDD write error
ERROR HDD error
ERROR HDD IO timeout
INFO JBOD inserted
WARNING JBOD removed
WARNING SMART T.E.C
WARNING SMART fail
INFO PD dedicated spare
INFO PD global spare
ERROR Config read fail
ERROR Config write fail
WARNING PD read error
WARNING PD write error
INFO PD scrub started
INFO PD scrub completed
WARNING PS fail
INFO PS normal
WARNING FAN fail
INFO FAN normal
WARNING Volt warn OV
WARNING Volt warn UV
WARNING Volt crit OV
WARNING Volt crit UV
Battery backup module is good
Battery backup module is charging
Battery backup module is failed
Battery backup feature is <string>.
Battery backup module is inserted
Battery backup module is removed
Type
JBOD <name> PD [<string>] starts upgrading firmware
process.
JBOD <name> PD [<string>] finished upgrading firmware
process.
JBOD <name> PD [<string>] upgrade firmware failed.
JBOD <name> PD <slot> has been freed from RG <name>.
JBOD <name> disk <slot> is inserted into system.
JBOD <name> disk <slot> is removed from system.
JBOD <name> disk <slot> read block error
JBOD <name> disk <slot> write block error
JBOD <name> disk <slot> is disabled.
JBOD <name> disk <slot> gets no response
JBOD <name> is inserted into system
JBOD <name> is removed from system
JBOD <name> disk <slot>: S.M.A.R.T. Threshold Exceed
Condition occurred for attribute <string>
JBOD <name> disk <slot>: Failure to get S.M.A.R.T
information
Assign JBOD <name> PD <slot> to be the dedicated spare
disk of RG <name>.
Assign JBOD <name> PD <slot> to Global Spare Disks.
Config read error occurred at LBA <address>-<address> of
JBOD <name> PD <slot>.
Config write error occurred at LBA <address>-<address> of
JBOD <name> PD <slot>.
Read error occurred at LBA <address>-<address> of JBOD
<name> PD <slot>.
Write error occurred at LBA <address>-<address> of JBOD
<name> PD <slot>.
JBOD <name> PD <slot> starts disk scrubbing process.
JBOD <name> PD <slot> completed disk scrubbing process.
Power Supply of <string> in JBOD <name> is FAIL
Power Supply of <string> in JBOD <name> is NORMAL
Cooling fan of <string> in JBOD <name> is FAIL
Cooling fan of <string> in JBOD <name> is NORMAL
Voltage of <string> read as <string> in JBOD <name> is
WARN OVER
Voltage of <string> read as <string> in JBOD <name> is
WARN UNDER
Voltage of <string> read as <string> in JBOD <name> is
CRIT OVER
Voltage of <item> read as <string> in JBOD <name> is
CRIT UNDER
Description
120