D-Link DSN-6120 User Manual page 67

2. In "/ Volume configuration / Logical unit", click "Attach".
The procedures are as follows:
1. Select a VD.
2. Input "Host" IQN, which is an iSCSI node name for access control, or fill-in wildcard
"*", which means every host can access to this volume. Choose LUN and permission,
and then click "OK".
3. Done.
Tips
The matching rules of access control are from the LUNs' created time, the
earlier created LUN is prior to the matching rules.
Step 4: Set a global spare disk.
To set a global spare disk, please follow the procedures.
1. Select "/ Volume configuration / Physical disk".
2. Check the gray button next to the PD slot; click "Set global space".
3. "Global spare" status is shown in "Usage" column.
Figure 4.4.6.5
Figure 4.4.6.6
67