4.4.6
Example
The following is an example to create volumes. This example is to create two VDs and set
a global spare disk.
Example
This example is to create two VDs in one RG, each VD shares the cache volume. The
cache volume is created after system boots up automatically. Then set a global spare disk.
Last, delete all of them.
Step 1: Create a RG (RAID group).
To create a RAID group, please follow the procedures:
1.
Select "/ Volume configuration / RAID group".
2.
Click "Create".
3.
Input a RG Name, choose a RAID level from the list, click "Select PD" to choose the
RAID physical disks, then click "OK".
4.
Check the setting. Click "OK" if all setups are correct.
5.
Done. A RG has been created.
(Figure 4.4.6.2: Creating a RAID 5 with 3 physical disks, named "RG-R5".)
Figure 4.4.6.1
Figure 4.4.6.2
65