Network Setting; Login Setting - D-Link DSN-6120 User Manual

Check "Change date and time" to set up the current date, time, and time zone before
using or synchronize time from NTP (Network Time Protocol) server. Click "Confirm" in
System indication to turn on the system indication LED. Click again to turn off.
4.2.2

Network setting

"Network setting" is for changing IP address for remote administration usage. There
are 2 options, DHCP (Get IP address from DHCP server) and static IP. The default setting
is DHCP. User can change the HTTP, HTTPS, and SSH port number when the default port
number is not allowed on host/server.
4.2.3

Login setting

"Login setting" can set single admin, auto logout time and admin / user password. The
single admin is to prevent multiple users access the same system in the same time.
1. Auto logout: The options are (1) Disabled; (2) 5 minutes; (3) 30 minutes; (4) 1 hour.
The system will log out automatically when user is inactive for a period of time.
2. Login lock: Disabled or Enabled. When the login lock is enabled, the system allows
only one user to login or modify system settings.
Figure 4.2.2.1
37