Connecting To Equipment; Connecting To A Computer - Epson PowerLite Pro Z8150NL User Manual

Connecting to Equipment

Connecting to Equipment
Observe the following precautions when connecting the projector to external equipment. Be sure to also read the documentation for the external
equipment.
Caution
• Turn off the projector and the external equipment. The projector or external equipment may fail if they are connected while the power is on.
• Check the shapes of the cable connector and port before connecting them. If connecting them is attempted in the wrong direction or when they do not match, failure or
equipment damage may occur.
Remove the interface cover before connecting external equipment. s "Attaching and Removing the Interface Cover"

Connecting to a Computer

This section provides examples of connecting the projector to a computer. The computer port and cable names may also be different from those given.
q
Refer to the following when projecting images from a computer that is connected through a network.
Projecting with the EasyMP Network Projection application software (provided with the projector). See your EasyMP Network Projection Operation Guide for more
information.
Projecting with the "Connect to a Network Projector" function provided with Windows Vista or Windows 7 s
Computer port
Connection 1 Monitor Out port
Connecting cable
5BNC display cable (commercially available)
p.193
p.145
Projector port
BNC input port
154