Adjusting The Tilt Of The Projected Image; Correcting Distortion In The Projected Image - Epson PowerLite Pro Z8150NL User Manual

Adjusting the Projected Image
B
To zoom, use the [ h
arrow buttons on the back of the projector as shown below.
C
When you're done, press the [Esc] button on the remote
control or on the back of the projector.

Adjusting the Tilt of the Projected Image

When setting up on a desk, adjust the horizontal tilt of the projector with
its front and rear feet.
] button on the remote control or the

Correcting Distortion in the Projected Image

There are four methods of correcting distortion in projected images as
below.
• Quick Corner
This allows you to manually correct each of the four corners of the
projected image separately. s "Quick Corner"
We recommend using Quick Corner to accurately adjust keystone
distortion.
• H/V-Keystone
This allows you to manually correct distortion in the horizontal and
vertical directions independently. You can perform easy H/V-Keystone
corrections by using the [w/
on the projector's control panel. s "H/V-Keystone"
• Arc Correction
Fine adjustment of the curved distortion caused by slack or shrinkage
of the screen. s "Arc Correction"
p.164
] [v/ ] [</ ] and [>/ ] buttons
p.166
p.168
163