Info Menu (Display Only) - Epson PowerLite Pro Z8150NL User Manual

Info Menu (Display Only)

Info Menu (Display Only)
Lets you check the status of the image signals being projected and the status of the projector. Items that can be displayed vary depending on the image
signal or input source being projected as shown in the following screen shots.
RGB Signal/Component Video
Sub Menu
Lamp Hours
Lamp Status
Source
Input Signal
Resolution
Video Signal
Refresh Rate
Sync Info
g
Signal Composite video
You can display the cumulative lamp operating time
When it reaches the lamp warning time, the characters are displayed in yellow.
The following icons show the status of the lamps.
: Lighted : Disable
When is displayed, the lamp is not operating normally. See "Reading the Indicators". s
You can display the Source name for the connected equipment currently being projected.
You can display the Input Signal selected in the Signal menu.
You can display the Resolution.
You can display the Video Signal selected in the Signal menu.
You can display the Refresh Rate g
You can display the image signal information.
This information may be needed if service is required.
g g
Signal/S-Video Signal
Function
*
.
.
LAN
p.96
89