Epson PowerLite Pro Z8150NL User Manual page 106

Problem Solving
The image is truncated (large) or small, or the aspect is not suitable
Check
Is the aspect adjusted correctly?
Is a wide panel computer image being projected?
Only when projecting computer images
Is the image still being enlarged by E-Zoom?
Is Scale set to On?
Is Position adjusted correctly?
Is the computer set for dual display?
Only when projecting computer images
Is the correct resolution selected?
Only when projecting computer images
Image colors are not right
Check
Do the input signal settings match the signals from the
connected device?
Is the image Brightness set correctly?
Are the cables connected correctly?
Is Contrast g adjusted correctly?
Is the Color Adjustment correctly?
Press the [Aspect] button on the remote control to select an aspect suitable for the input source.
p.27
s
Change the setting according to the signal for the connected equipment. s Signal Menu - Resolution
p.62
Press the [Esc] button on the remote control to cancel E-Zoom. s
Set Scale to Off on the configuration menu. s Signal Menu - Scale
Press the [Auto] button on the remote control or the [Enter] button on the control panel to
automatically adjust the position of projected images from a computer. If the images are not adjusted
correctly after using automatic adjustment, you can make the adjustments using Position from the
configuration menu.
Apart from computer analog RGB signals, you can adjust other signals while projecting by adjusting
Position from the configuration menu. s Signal Menu - Position
If dual display is activated in the "Display Properties" of the computer's Control panel, only about half of
the image on the computer screen is projected. To display the entire image on the computer screen,
turn off the dual display setting. s Computer video driver documentation
Set the computer so that the signals being output are compatible with the projector.
s "Supported Monitor Displays"
Change the setting according to the signal for the connected equipment. s Signal Menu - Input
Signal, Video Signal p.62
Adjust the Brightness setting from the configuration menu. s Image Menu - Brightness
Check that all the cables required for projection are securely connected. s p.154,
Adjust the Contrast setting from the configuration menu. s Image Menu - Contrast
Adjust the Advanced setting from the configuration menu. s Image Menu - Advanced
Remedy
p.41
p.200 s Computer documentation
Remedy
106
p.62
p.62
p.60
p.156
p.60
p.60