Part Names And Functions; Front/Top - Epson PowerLite Pro Z8150NL User Manual

Part Names and Functions

Part Names and Functions

Front/Top

The illustration shows the projector with a standard zoom lens installed.
Name
Handle Use these handles when carrying the projector.
1
Also, you can pass a theft-deterrent wire lock
through the handles to secure the projector.
p.50
s
Caution
Do not carry the projector by yourself.
Two people are needed to unpack or carry the
projector.
Security slot( ) The security slot is compatible with the Microsaver
2
Security System manufactured by Kensington.
p.50
s
Air intake vent Takes in air to cool the projector internally. If dust
3
(Air filter) collects here it can cause the internal temperature
to rise, and this can lead to problems with
operation and shorten the optical engine's service
life. Be sure to clean the air filter regularly.
s p.116,
Front adjustable When set up on a desk, turn to extend and retract
4
foot to adjust the horizontal tilt.
The front adjustable feet can be removed when
the projector is installed on a ceiling. s
Front cover Remove this cover to remove or install the lens
5
unit when replacing the lens. s
This cover must be installed when using the
projector.
Remote receiver Receives signals from the remote control. s
6
Interface cover Remove this cover to connect cables to the ports
7
inside when connecting the projector to video
equipment. s p.16,
Projection lens Images are projected through here.
8
Function
p.122
p.195
p.188
p.193
14
p.23